background image

17

S L I T   L A M P   b y   K E E L E R

www.keeler.co.uk

The mirror should be cleaned only with a soft clean lens cloth.

The mirror is an interference fit in its holder and can be removed by 
grasping it firmly and pulling it out of its holder. Slide in the replacement 
mirror taking care to avoid touching the reflective surface.

Care must be taken to keep the objective and the eyepiece lenses clean – 
use only soft clean lens cloths to clean optical surfaces.

13.4 electrical connectionS

Routinely check all electrical connections, cables and connectors. To 
access the bulb connections see earlier in this section for guidance.

13.5 opticS

The optics should be wiped clean of any loose dirt or debris with a suitable 
dust brush then cleaned with a soft dry lens cloth, washed linen or other 
non abrasive lens cleaning material.

The condenser lens beneath the illumination lamp will require cleaning; to 
access this, remove the lamp as detailed earlier, clean the condenser lens 
and then replace the lamp.

13.6 axle and mechanical partS

If the Slit Lamp becomes hard to move on the glide plate, the plate should 
be cleaned with a lightly oiled cloth or silicon polish. The axle should be 
cleaned only with dry lint free cloths.

The Keeler H-Series Slit Lamps are guaranteed for three years (3) against 
faulty workmanship materials or factory assembly. Warranty is on a Return 
To Base (RTB) basis at the cost of the customer and may be void if the Slit 
Lamp has not been regularly serviced.

The manufacturers warranty and terms and conditions are detailed on the 
Keeler UK website 

http://www.keeler.co.uk/terms_and_conditions.htm

The mirror, main illumination lamp and general ‘wear and tear’ are 
excluded from our standard warranty.

14   Warranty  = 3 yearS

The manufacturer declines any and all responsibility and 
warranty coverage should the instrument be tampered with 
in any manner or should routine maintenance be omitted 
or performed in manners not in accordance with these 
manufacturer’s instructions.

There are no user serviceable parts in this instrument. Any 
servicing or repairs should only be carried out by Keeler Ltd. 
or by suitably trained and authorised distributors. Service 
manuals will be available to authorised Keeler service 
centres and Keeler trained service personnel.

Summary of Contents for Slit Lamp H Series



























Reviews: