4.
It is now time to assemble the insert.
Remove the box and the bottom plate from the
firebox. If you want to disassemble the body and the
front-door, open the door/doors max and unscrew
the four bolts (see ill). Carefully pull the front towards
you. (App weight of front and door mod 2001, 35 kg)
Important! The door/doors are not to be removed
from the front.
5. Put the insert in place (so that it touches the smoke
oulet pipe) and adjust the insert to a level position with
the adjustable feet. The rear two feet are adjusted
inside the firebox and the two in the front are adjusted
from below the insert.
Tip! Put a magnetic spirit-level on the grinded surface
on the inside of the door. This is very important to en-
able the automatic closing and locking of the door.
Grab the smoke outlet pipe by the protective iron
rod and pull it into position enabling you to fit the two
screws.
Once again, check that the insert is level.
6.If nessesary assemble the front/door to the insert
body. Be very careful to fit the screws firmly.
7. Fit the fireplace. Start with the bottom plate and the
you assemble the vermiculite kit in the following order,
1. Back, 2. Rear Left, 3. Top, 4. Rear right (now you
have to gently push the top piece upwards) 5. For
-
ward left, 6. Forward right . The pieces must aligne
with the inside sleeve on the bottom plate.
Finish the installation by placing the log stopper on the
front of the bottom plate.
8. If the open fireplace is narrow you can improve the
cirkulation by making a hole in the lintel of the open
fireplace. This hole is accomplished with a powerdrill.
The hole can be decorated by a Keddy hot air grill.
(Accessory)
If you want to cover the space between the insert and
the original fireplace you can fit Keddys decorative
frame for wall connection and guard. (Accessories)
- 7 -
