background image

GENERAL

Thank you for choosing our fireplace insert!

Keddy's fireplace inserts have a number of unique characteristics, for example:

* Flat-ground hatches

* Innovative selfclosing door

* Pre-heated combustion air

* Cast iron for long service life

Keddy fireplace inserts have the following accessories:

* Installation kit

* Guard, forged steel

* Guard, steel grate

* Frame for wall connection (for surround installation)

* Hot air grill, forged steel

* Steel pipe

* Outdoor air unit

* Stand (for surround installation)

* Reflection plate (for surround installation)

Important! Save these installation instructions and the associated firing instructions!

Quality approval

Keddy's fireplace inserts have been tested by a certified testing institute and have met the requirements of the 

Swedish Building Regulations and CE Marking. In addition to this, the fireplace inserts also meet the require

-

ments for the Nordic Ecolabel.

Manufacturer's declaration

Keddy fireplace inserts have been manufactured in accordance with the documents that form the basis for the 

respective certificates and their associated requirements for production inspections.

IMPORTANT POINTS

* Contact the Planning and Building Committee in your municipality concerning the building notice.

* It is also recommended that you contact a certified chimney sweep prior to installation.

NOTE! Read through all of the installation instructions before beginning the installation.

* Make sure that you get the right dimension and length of the flue, see p. 4.

* The installation has to be inspected by a certified chimney sweep before you start firing.

* In order for the warranty to apply, it is important you follow the care and firing instructions carefully, see 

pages 9-10.

* WARNING! Parts of the insert become very hot during operation and may cause burn injuries if touched. 

There is a glove in every insert delivered, use this when handling the door and damper.

* To guarantee the function and safety of the insert, we recommend that a professional perform the installa

-

tion. Our dealers can recommend suitable fitters. You can find information about our dealers on www.keddy.

se.

- 3 -

Summary of Contents for SK1000













Reviews: