23
PRODUCT DESCRIPTION
2.3 Product features
This instruction manual describes the power units of the following devices:
Unit type:
Active Infeed Controller (AIC) / Charging module
Series:
COMBIVERT H6
Power range:
11…173 kVA / 400 V
Housing:
B, C, E, G, P, S, U, W
The COMBIVERT H6 is characterized by the following features:
• System bus EtherCAT
1)
Transfer of setpoints and actual values between
control and AIC module.
• Error bus
Channel 1: Error output of the connected DC buses
Channel 2: Charge condition of the DC link bus
• Diagnostic interface
RS232/485 interface for the connection of displays
or service tools.
• Inputs and outputs
4 digital inputs
4 digital outputs
• Separate supply
Internal supply of the control unit and driver/power
unit are safe separated.
• Internal fuses
The driver/power unit is connected via internal fuses
to the DC link bus.
• Cooling System
universally by flat rear and air heat sink
1)
EtherCAT
®
is a registered trademark and patented technology, li
-
censed by Beckhoff Automation GmbH, Germany.
2.3.1 Special features of the AIC module
• System bus EtherCAT
Transfer of setpoints and actual values between
control and AIC module.
2.3.2 Particularities of the charging unit
• Temperature inputs
Temperature inputs for braking resistor and filter
monitoring
• Switch input
Monitoring of the main contactor with auxiliary con-
tact
Summary of Contents for COMBIVERT H6 Series
Page 2: ......