KEB COMBIVERT G6, Safety Manual

Page: 5 / 24

GB - 5
Preface
1. Preface
1.1 General
First we would like to welcome you as a customer of the company Karl E. Brinkmann GmbH
and congratulation to the purchase of this product. You have decided for a product on highest
technical level.
The described hard- and software are developments of the Karl E. Brinkmann GmbH. The
enclosed documents correspond to conditions valid at printing. Misprint, mistakes and techni-
cal changes reserved.
The instruction manual must be made available to the user. Before working with the unit the
user must become familiar with it. This especially applies to the knowledge and observance
of the following safety and warning indications. The used pictograms have following signifi -
cance:
Danger
Is used, if life or health of the user are endangered or sub-
stantial damage to property can occur.
Warning
Caution
Attention
Is used, if a measure is necessary for safe and trouble-free
operation.
observe at
all costs
Information
Is used, if a measure simplifies the handling or operation of
the unit.
Aide
Tip
1.2 Safety instructions
Observe safety and
operating instruc-
tions
Precondition for all further steps is the knowledge and ob-
servance of the safety and operating instructions (instruction
manual part 1). This is provided accompanied by the device
or by the download site of www.keb.de.
Non-observance of the safety and operating instructions leads to the loss of any liability
claims. The warnings and safety instructions in this manual work only supplementary. This
list is not exhaustive.
1.3 Validity and liability
The use of our units in the target products is outside of our control and therefore lies
exclusively in the area of responsibility of the machine manufacturer.
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibil-
ity. This also applies to any violation of industrial property rights of a third-party.
Selection of our units in view of their suitability for the intended use must be done generally
by the user.