23
PrODUcT DeScrIPTION
2.3 Product features
This instruction manual describes the power circuits of the following devices:
Device type:
Drive controller
Series:
COMBIVERT F6
Power range:
45...90 kW / 400 V
Housing
6
The COMBIVERT F6 is characterized by the following features:
• Operation of three-phase asynchronous motors and three-phase synchronous
motors, in operating modes open-loop or closed-loop with and without speed
feedback
•
following fieldbus systems are supported:
EtherCAT, VARAN, PROFINET, POWERLINK or CAN
• System-overlapping operating concept
• Wide operating temperature range
• Low switching losses by IGBT power unit
• Low noise development due to high switching frequencies
•
Different heat sink concepts:
• Temperature-controlled fan, easily replaceable
• Torque limits and s-curves are adjustable to protect gearboxes
• General protection functions of the COMBIVERT series against overcurrent, over-
voltage, ground fault and overtemperature
• Analog inputs and outputs, digital inputs and outputs, relay output (potential-free),
brake control and -supply, motor protection by I²t, KTY- or PTC input, two encod-
er interfaces, diagnostic interface, fieldbus interface (depending on the control
board)
Summary of Contents for COMBIVERT F6 series
Page 2: ......
