CLEANING THE MIRACLEAN®
GRIDDLE
The surface of the MIRACLEAN
®
Griddle is very
durable and with proper care, following the procedures
below, will last many years.
A sample of Keating Klenzer, Keating palmetto brush
and a 4" scraper are included with each new griddle.
1.
Scrape MIRACLEAN
®
surface.
2.
Clean your Miraclean
®
Griddle while hot at
300° F to 350° F. Using a plastic pitcher, pour
water ahead of a palmetto pot brush. Then
scrub the griddle clean with the pot brush
sweeping the water into the drain trough.
3.
Sprinkle with Keating Klenzer.
Polish with a soft cloth (towel). It will sparkle
like new in just a few minutes. Rinse with
potable water to remove excess Keating
Klenzer. Proper care should be taken to fully
clean the griddle on a regular basis.
CLEANING CONTROL PANEL
Clean any grease build-up on switches and thermostat
knobs.
NOTE:
If grease gets into the working mechanism of
a switch or thermostat, it may cause the unit to fail.
GREASE BUILD-UP NEAR ANY OPEN FLAME IS A
FIRE HAZARD.
CLEANING CABINET
The front, back and sides of the cabinet should be kept
clean for sanitary reasons.
CARE OF THE MIRACLEAN® SURFACE
The Miraclean
®
surface is very hard. With proper care,
the MIRACLEAN
®
surface and its unique cooking
properties will last for many years.
Damage done to the Miraclean
®
surface is irreplacable.
NEVER USE A GRIDDLE STONE, BRICK OR
SCREEN TO CLEAN THE MIRACLEAN
®
SURFACE. DAMAGE DONE TO THE
MIRACLEAN
®
SURFACE BY GRIDDLE STONE,
BRICK OR SCREEN WILL VOID THE WARRANTY.
DO NOT HACK, CHOP, HIT OR CUT ON THE
MIRACLEAN
®
SURFACE. YOU WILL DENT THE
STEEL
PLATE UNDER THE TRIVALENT
CHROME. IT IS EVEN POSSIBLE TO HACK TWO
NICKS CLOSE TOGETHER AND ACTUALLY
TEAR THE MIRACLEAN
®
SURFACE AS THE
CHROMIUM WILL NOT STRETCH. PROPER USE
OF THE UTENSILS SUPPLIED WITH YOUR
MIRACLEAN
®
GRIDDLE WILL
PREVENT
SURFACE DAMAGE. THE DAMAGE DONE TO
THE MIRACLEAN
®
SURFACE IS IRREPARABLE.
NEVER USE ICE TO COOL THE MIRACLEAN
®
SURFACE. USE OF ICE MAY WARP THE
MIRACLEAN
®
SURFACE.
USE ONLY KEATING SUPPLIED CLEANING
TOOLS AND KLENZER.
USE ONLY A KEATING STEEL SPATULA.
DO NOT CLEAN SCRAPER ON SPLASHBACK,
GREASE BUILD-UP WILL OCCUR WHICH MAY
RESULT IN A FIRE.
DO NOT OBSTRUCT THE FLUE. THE FLUE HAS
BEEN DESIGNED SPECIFICALLY TO EXHAUST
THE BY-PRODUCT OF ANY COMBUSTION. ANY
OBJECTS (STEAK WEIGHTS, EGG COVERS,
PANS, RAGS, UTENSILS, ETC.) PLACED ON THE
FLUE WILL INHIBIT THE PROPER COMBUSTION
AND EXHAUST, THEREFORE CAUSING HEALTH
HAZARDS.
DO NOT USE A POWER WASH, HOSE OR STEAM
CLEANER FOR DAILY CLEANING.
PREVENTIVE MAINTENANCE
Preventive maintenance should be done in daily, weekly,
monthly and yearly intervals as necessary. Following
preventive maintenance procedures will help keep your
MIRACLEAN
®
Griddle working efficiently. Proper care and
servicing will lead to years of quality performance.
6
