background image

Improper installation,
adjustment, alteration, 
service or maintenance 
can cause property 
damage, injury or death.
Read the installation, 
operating and maintenance
instructions thoroughly 
before installing or 
servicing this equipment.

WARNING

Improper installation
can cause damage,
injury or death.

NOT INSTALLED, OPERATED AND
MAINTAINED IN ACCORDANCE WITH
THE MANUFACTURER'S INSTRUCTIONS,
THIS PRODUCT COULD EXPOSE YOU
TO SUBSTANCES IN FUEL OR IN FUEL
COMBUSTION WHICH CAN CAUSE
DEATH OR SERIOUS ILLNESS AND
WHICH ARE KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH
DEFECTS OR OTHER REPRODUCTIVE
HARM.

PROPANE GAS MAY EVENTUALLY LOSE
ITS ODOR AND PRECAUTIONS SHOULD BE
TAKEN TO ASSURE THAT PROPANE GAS IS
NOT PRESENT EVEN THOUGH YOU DO
NOT DETECT AN ODOR. IF THERE IS ANY
DOUBT, YOU SHOULD CALL YOUR LOCAL
PROPANE GAS SUPPLIER FOR
ASSISTANCE.

FOR YOUR SAFETY

Do not store or use
gasoline or other
flammable vapors or
liquids in the vicinity
of this or any other
appliance.

Purchaser should post in a prominent location instructions to

be followed in the event the user smells gas. This information

shall be obtained by consulting the local gas supplier.

THE EQUIPMENT IS TO BE
INSTALLED TO COMPLY WITH THE
BASIC PLUMBING CODE OF THE
BUILDING OFFICIALS AND CODE
ADMINISTRATORS INTERNATIONAL,
INC. (BOCA) AND THE FOOD
SERVICE SANITATION MANUAL OF
THE FOOD AND DRUG
ADMINISTRATION (FDA).

WARNING

Do not store flammable

liquids near this or any

other appliance.

Summary of Contents for 37399


















Reviews: