KDS EA760A-24, Instructions Manual

Page: 26 / 72

DS-
00
24
Maintenance and Cleaning
Check the measuring tool each
time before use.
In case of visible
damage or loose components in-
side the measuring tool, safe func-
tion can no longer be ensured.
Keep the measuring tool clean and
dry at all times to ensure proper and
safe working.
Do not immerse the measuring tool
in water or other fluids.
Wipe away debris or contamination
with a dry, soft cloth. Do not use
cleaning agents or solvents.
In order not to affect the measuring
function, decals/stickers or name
plates, especially metal ones, may
not be attached in the sensor area
6 on the front or back side of the
measuring tool. Do not remove the
contact pads
5 on the backside of
the measuring tool.
Disposal
Measuring tools, accessories and
packaging should be sorted for
environmental-friendly recycling.
the On/Off button 4 . Hold the On/
Off button until the illuminated ring
1 slowly flashes red, indicating the
calibration of the measuring tool.
When the calibration was success-
ful, ring
1 lights up green and the
measuring tool automatically ready
for operation again.
Note: If the measuring tool does not
automatically start, repeat the rec-
alibration. If the measuring tool still
does not start, send it to an author-
ised customer services agent.
Maintenance
Do not dispose of measuring tools
and batteries/rechargeable batteries
into household waste!
Subject to change without notice. -
▶