KDF 1500-Plus, Instruction Manual

Page: 6 / 31

4
If any of the following situations occur, immediately turn off the power
switch and breaker of this machine to cut off the power supply and contact
your dealer. Continued use may cause fire or electric shock.
● When an abnormality such as smoke, a strange odor, or a noise occurs.
●
If water gets inside.
●
When foreign matter enters the inside.
● If the unit is dropped or the cabinet is damaged/deformed.
●
Do not disassemble except where indicated. It may cause electric shock
or malfunction.
●
Perform wiring work safely and securely in accordance with the
electrical equipment technical standards and the regulations of the
electric power company. Also, do not use a power supply other than the
specified voltage. It may cause a fire.
● Ask a licensed electrician to perform power supply work.
Unlicensed work is not only against the law, but also dangerous and
may cause electric shock, fire and breakdown.
●
When connecting the power cord to this unit, be sure to perform ground
work. It may cause electric shock.
●
Do not block the fan intake port on the back of this machine. The internal
temperature will rise, which may cause a fire or malfunction.
●
Do not use the voltage other than the power voltage shown on the rating
plate. It may cause fire or electric shock. This unit can only be used in
Japan.
●
When installing this unit, keep it 100 cm above the ceiling and at least
30 cm away from walls and equipment in other cases. Also, do not place
any objects on the top surface of this machine. It may cause fire or
malfunction.
●
Do not install in a place where flammable materials may fall onto the
projector or fly. It may cause a fire.
●
Do not install in places subject to rain or water. There is a risk of electric
shock.
●
Do not place a heavy object on the power cord or the power cord under
the unit. The cord may be scratched, resulting in fire or electric shock.
● Do not damage, modify, forcibly bend, twist or pull the power cord.
The cord may be damaged resulting in fire or electric shock.
●
Do not turn off the power supply by turning off the power switch or
turning off the breaker while the cooling fan of this unit is operating.
The external case of this machine may become hot and burn, which may
cause a fire.
●
Do not process substances that generate explosive gas due to heat
treatment with this machine. Explosion may result in death, injury or fire.
Take measures beforehand to prevent the generation of explosive
gases.
●
Be sure to follow the equipment, rating, and method described in the
outlets and connection terminals on the back of this unit. Internal parts
may burst or burn, which may cause a fire. The internal parts may burst
or burn, which may cause a fire. It may also cause a malfunction of this
unit and connected devices.
WARNING