18
4.
Segment
3
:
・
Since the temperature is set to 700
℃
, which is the same as the previous segment, the operation will
be
held
at
700
℃
for 0:10 hours.
・
EV2-OFF is set to 0:00, so it will be turned off immediately after shifting to segment 3 (after 0:00).
・
Because EV3-ON is set to 0:00, it turns on immediately after moving to segment 3 (after 0:00).
5.
Segment
4
:
・
Temperature, time, buzzer, gas 1 are the same as the previous explanation.
・
EV3-OFF is set to 0:05, so it will turn OFF 0:05 after moving to segment 4.
6.
Segment
5
:
・
Temperature, time, and gas 1 are the same as described above.
・
EV0-ON is built in 0:05, so it will turn ON 0:05 after moving to segment 5.
7. End of operation
:
・
The operation will end after the set time for segment 5 has elapsed.
The temperature will be cooled naturally and all events will be turned off.
■
How to program
◆
Pattern selection
1. In standby mode, set the pattern display to 17 with the up and down arrow keys and press the F1
(program)
key.
◆
Pattern name input
1. When the cursor is "Seg0", press the Up key to move the
cursor to the pattern name.
2. Use the left/right keys to move to the place you want to
input and press “UP” or “DOWN”.
Press the key to select the character (number, alphabet,
symbol) you want to enter.
In our example, we type KDF PLUS (Screen 1).
3. When input is complete, press the down key to return the
cursor
to
"Seg0".
◆
Input of other items
1. Use the up/down/left/right direction keys to move the
cursor to “Seg0”, “Temperature”, and use the “UP” and
“DOWN” keys to set {20}.
※
If you set the temperature, the initial values will be displayed for items
other than temperature, and you can enter them (Screen 2).
2. Press the right arrow key and move the cursor to "M" of
"Time" and set it to {10}.
3. When the right direction key is pressed further and the
cursor moves over the “buzzer”, the next screen is displayed
and gas 1 can be set (screen 3).
Set {0} for "H" and {00} for "M" of "Gas 1-ON".
4. You can move to the next segment with the down arrow key.
Program the rest of the contents in the same way.
5. When all the programs are completed, press the return key
to memorize the settings and shift to the standby mode.
【
Screen 1
】
【
Screen 2
】
【
Screen 3
】
Summary of Contents for 1500-Plus
Page 2: ......