49
Cautions
Closing the card slot cover
After stowing the cover hinge, press on the cover
①
with the
flat part of your finger. Rub your finger over the cover in the
direction of arrow
②
to ensure that the cover is not partially
open.
①
②
●
When liquid other than water gets on the product
If any of liquid other than water (seawater, detergent, alcohol,
etc.) gets on the product, wash it off with water immediately.
You can wash the product by holding it about 10 cm below a
faucet or shower head with tap water in room-temperature (5
℃
- 35
℃
) and running at a moderate flow rate (up to 6 liters per
minute).
When the product is dirt, wash the product with hands holding
the card slot so as not open. Do not use brash etc.
●
After the product gets wet
After the product gets wet, drain water, and wipe the main unit
with a clean dry cloth.
In cold climates, water on the product may turn to frost. Using
the product with frost may cause a fault. Do not leave water drop
on the product.
●
Rubber seals
The rubber seals around the card slot cover help keep the
product waterproof. Do not damage or remove the rubber seals.
When closing the card slot cover, take care not to get the rubber
seals caught. Forcibly closing the cover with the rubber seals
caught may damage them resulting in loss of waterproof property.
Even small foreign matter on the seals, such as a hair or grain of
sand, may allow water into the product.
If any liquid other than plain water (e.g. alcohol) gets on the
rubber seals, it may cause deterioration in durability.
Do not insert sharp objects into the gaps around the card slot
cover. May damage or deform the product or damage the
rubber seals, causing water leak.
