Cautions
48
Do not place the product directly on sand at a beach, etc.
If sand gets inside the microphone, speaker, etc., it might
cause decrease of sound. If sand gets inside the product, it
might cause overheating or a fault.
Do not use the product underwater.
Do not leave the product in a humid place, such as a
bathroom or kitchen, for an extended period of time.
●
Even after draining, water may remain on the product. Though
not worth worrying about for common use, do not place the
product near things that you do not want to wet. Also, take
care not to wet your clothes, inside of bag, etc.
●
Remove any water from the microphone and speaker,
especially if the water is making the sound unclear.
●
Do not spray the product with high-pressure water or
submerge it in water for extended periods of time, as the
product is not designed to withstand high water pressure.
●
Do not wash the product in a washing machine or ultrasonic
bath.
●
Do not immerse the product into a bathtub. The product is not
resistant to hot temperatures.
●
The rapid changes of temperature may cause condensation,
resulting in malfunction. Wait until the product reaches room
temperature before you bring it from a cold place into a warm
bathroom.
●
The product does not float on water.
●
Card slot cover
Make sure that the card slot cover is firmly closed. Even small
foreign matter on the seals, such as a hair or grain of sand, may
allow water into the product.
Do not open or close the card slot cover with gloved hands.
Even small foreign matter on the seals, such as a hair, may allow
water into the product. Wipe off any water droplets or dirt on
each of the covers with a clean, dry cloth before closing it.
If the card slot cover has deteriorated or is damaged, the
product will lose its waterproof capability.
