13
Get
ting R
ead
y
Attaching au Nano IC Card 04
• When installing your au Nano IC Card 04, be sure to use the
supplied IC Card Tray Ejecting Tool (sample).
1
Turn the power off and open the card slot
cover
2
Hook the IC Card Tray Ejecting Tool (sample)
on the edge of the tray and pull it out
Tray
IC Card Tray Ejecting
Tool (sample)
3
Place the au Nano IC Card 04 on the tray,
making sure that the notch is oriented
properly, then insert the tray straight into the
au Nano IC Card 04 slot (upper side)
After the tray is inserted, hook the IC Card Tray
Ejecting Tool (sample) on the edge of the tray and
press it all the way.
• Take care so that the au Nano IC Card 04 does not
get over the tray. Do not apply excessive force and
insert it all the way straight into the slot. If the tray
does not fit into the slot, do not press it with force.
Pull the tray out and insert it again with the front
edge raised. If the au Nano IC Card 04 gets over the
tray, the product might not recognize the au Nano IC
Card 04.