11
Getting ready
Removing the au IC card
Press the lock with
the finger (
①
) and
pull the au IC card
out 2-3 mm in the
direction of the
arrow
②
Lift your finger from
the lock and press
the au IC card lightly
to slide out to the
direction or arrow
②
• Do not press the au
IC card downward with
excessive force.
◎ Note the following points, which may cause malfunction or
damage, when handling the au IC card.
• Do not touch the IC (metal) part of the au IC card or the IC
card terminal inside the ISW11F.
• Insert the IC card in the correct direction.
• Do not use excessive force to attach or remove the IC card.
◎ An error message is displayed if the au IC card is not attached
correctly or if there is a problem with the au IC card.
◎ Do not lose the au IC card after it has been removed.
Lock
②
①
Attaching/removing the au IC card
• Before attaching/removing the au IC card, first turn the
ISW11F off, and remove the battery pack.
Attaching the au IC card
Insert the au IC card into the guide with its IC
surface face down
• Note the orientation of the notch.
Notch
IC
au IC card
compartment