Using the parts placement guides:
The parts placement guides on the following pages are color coded to show the location of the various parts. Parts which are
not yet to be installed or already have been installed are colored the same as the background color. The guides are scaled so
that the writing on them is easy to see on a computer monitor and come out crisper after the conversion to pdf. Unfortunately,
if you print all these pages out, it will use up a bunch of your ink jet ink.
Some parts do not have values marked on them or are very hard to read. Capacitors are not marked so these have been
color coded with a marker on the part carrier. This color matches the color shown on the location guides.
SOT-23 parts have numbers printed on them, but are very hard to read. Therefore, these parts are also color coded, but with
a color sticker, as they come in plastic carriers. Again, the color on the carrier matches the color shown on the placement
guide diagram.
Resistors have their value printed on them, though it might take a magnifying glass to read the numbers. Therefore,
individual values are not color coded.
12
