Power-On/Off Button
1.
Pressing this button will power on the wheelchair.
2.
Pressing this button again will power off the wheelchair.
Menu Setting
Control Joystick
WARNING
18
19
Operation Guide/Electromagnetic Unlocking Valve
Operation Guide
Long press the “Confirm” button in the main interface to enter the “Setting” interface. This interface provides settings
for language, sound, auto shut down, sport mode and backlight. You can select the corresponding setting options
through the press of the speed buttons or the front and back movement of the joystick. The left and right movement of
the joystick can make specific settings for the selected options. Then, press the “Confirm” button to make the settings
take effect when the configuration is accomplished.
1.
Language: Switch the language between Chinese and English (Fig. E4 and Fig. E5).
2.
Sound: Turn on/off the sound. There are three options for sound settings: turn on, turn half on and turn off. Turn on:
turn on all the warning tones; Turn half on: turn off button operation sound and joystick operation sound; Turn off:
turn off all the sound except the horn and the SOS sound.
3.
Auto Shut Down: The device will automatically shut down when there is no operation for a long time. When the auto
shut down function is turned on, if the device hasn’t been operated for 10 minutes, the joystick will prompt that it
will be automatically turned off. If there is no operation 10 seconds later, the joystick will automatically shut down.
Sport Mode
：
Adjust the movement control curve of the wheelchair. There are three modes: soft, normal and powerful.
4.
Backlight
：
Adjust the brightness of the LCD backlight.
1.
When operating the wheelchair for the first time, it is recommended to move the wheelchair at a
low speed gently and gradually pushing the control joystick forward. The practice will help you
familiarize yourself with controlling the speed and start and stop of the wheelchair.
★★★
2.
Set the control panel properly.
3.
Do not do sharp turns at high speeds.
4.
Fail to follow the warnings may result in tilting and causing serious bodily injury and property damage.
5.
The control joystick on the control panel controls the speed and direction smoothly and provides 360
degrees of omnibearing manoeuvrability comfortably and effortlessly. A spring is equipped inside the
joystick which automatically returns to its original middle position.
6.
Push the joystick towards the target direction. The joystick can control the drive proportionally, the
harder the push, the faster it goes. The max traveling speed is 6km/hr (3.75miles/hr).
7.
Release the control joystick slowly and gradually for the wheelchair to slow down safely. The
wheelchair will automatically slow down and minimize the corrective direction.
Turn left
Reverse
E7
E6
Menu
Button
Control Joystick
In “Lock” position
Forward
In “Unlock” position
Turn right
E4
E5
Electromagnetic Unlocking Valve
The electromagnetic unlocking valve has two modes. Please ensure it is in “Lock” position (Fig. E6) before
using. Otherwise, it will cause security risks.
