高宝印刷机械科技有限公司
KC Printing Machine (group) limited
28-9
Website: Http://www.dg-padprinter.com
Online contact Skype: yingsuhuakelven
QQ: 726986799
Email:
[email protected] [email protected]
A．根据工件的性质选择合适的烫金纸。
Choosing suitable stamping foil according to the substrates to be stamped
B．烫金纸安装于下图，把金箔安装到放纸轮 A 上固定好后，拉出箔沿箭头方向绕，用手转动卷纸手轮 B，让金箔从
胶辊和光螺中穿过，然后固定在收纸轮 C 上。
Install foil on the wheel A and fix it, Pull it and across along the direction of arrow. Then pass through rubber roller and
steel roller, roll it on the collecting wheel C.
C．
调整烫金纸的位置，使其处于烫印面的正上方，然后用定位环定位。
Adjust the position and make it locate above the stamped objects, Then fix it with Location loop.
D．调节拉杆的长度和摆角，使烫金纸距离烫印模板 10mm 左右。
Adjust the length and angle of steel rod, make the distance for 10mm between stamping foil and stamping plate.
5、烫印效果决定的主要因素：
注：压力、时间、温度以及合适的电化铝。
用户首先根据质材，选配合适的电化铝，其次烫印压力、时间、温度，根据实际情况略作调整。
It is very important to master how to adjust the pressure, time, temperature and choosing stamping foil. Please
flexible revision these parameters based on practical situation.
六、操作程序：
Operation process
1、将液压站管接入设备油管上。
Connecting the Hydraulic station with this machine.
2、将设备电源插入有保护接地的电源上（必须接地可靠）。
Connecting Power supply which protective grounding connection
.
工作按钮
Start Button.
A
C
