高宝印刷机械科技有限公司
KC Printing Machine (group) limited
28-13
Website: Http://www.dg-padprinter.com
Online contact Skype: yingsuhuakelven
QQ: 726986799
Email:
[email protected] [email protected]
you making Metal fixture to fix them, Please use the fixing part on the working table to install it; For paper , Please
adhering two pcs Thin paper serape on the working table. If you use this machine to stamp very thin and soft objects such
as paper and film, We will make flat stamping machine with vacuum table, Please enquire to our sales representative.
2
、烫印时，要保证烫印板与烫印面的紧密接触。
机器出厂以前我们已经将烫板和工作台的平行度作出调整，在您进行正式烫印后可以先行对于烫金的平衡度作
出测试，请在工作台上放置一块纸板，将
烫板压下，观察纸张表面的烫印情况，如果出现印痕轻重不同的情况，可以
微量调节烫板上面的固定螺丝；
Ensure stamping plate contact compactness with the surface of object stamped when working.
Before stamping , Please take a test when put one paper on the working table. Please observe the impression
on the paper. Please adjust the Balance screw when you find the
impression is not even.
3、
操作前应检查各气路、电路以及接地装置是否良好。
Please inspect gas path, circuit and earthling device.
4、
不同质地的印件要求不同的烫金纸，要根据印件选择与其相符的烫金纸。
Please choosing stamping foil consonant with object to be stamped
.
烫金机的标准规格是
640mm*120m,
但是通常的产品的烫印面积是不定的，您需要使用烫金纸切割机来把烫金纸切
割成适合的宽度
。
The standard size of stamping foil is 640mm*120mm, stamping size of different objects need different size, So, You
need cu the stamping foil to fit width with foil cutter.
5、
工作过程中，不要将身体某部位倾向烫印模块。
Please do not touch stamping head because of high temperature while working.
烫板的温度很高，所以在操作机器过程当中，请避免身体部位触及烫板，
以免被烫伤
6、
若操作者离开工作现场，必须关掉气源、电源
。
Handle
wheel
转动这个手柄可以手动牵引烫金纸的输送
Turning the wheel, the stamping foil will be forwarding so
that you adjust the position between stamping foil and objects.
