KBS Gastrotechnik TK 220 CHR, Instruction Manual

Page: 13 / 37

11
5. Remove the bottom bracket 7 and fix the bottom bracket 2 together with washers on the axle
and the plastic spacer instead of it. Screw the bracket 7 in place of the bracket 2 .
6. Hang the freezer compartment door on the axle of bracket 7 .
7. Turn the bracket 6 around by 180° together with the washers on the axle and the plastic
spacer. Unsrew the axle and the washers and screw them on the other side of the bracket.
Once the bracket
6 is attached to the freezer compartment door, fix it in place on the other
side of the freezer in the uppermost apertures.
8. Use the covers c to cover the bracket and the remaining space.
9. Remove the bolt covers a and the stoppers b . Remove the screws that hold the handles in
place. Move the handles to the other side and screw them in place. Place the stoppers into the
remaining apertures in the door, and put the screw caps in place.
10. Remove the cover 10 from the bottom cover 1 and insert it to the guides on the other side of
the bottom cover (symmetrically to former position). Insert left and right legs of the bottom
cover
1 (see pic.) and push it until cover fixing.
OPERATION PROBLEMS AND THEIR SOLUTIONS (TROUBLESHOOTING)
What if …
•
The appliance is plugged in to the mains but it does not work and the electricity
supply voltage indicator is not illuminated.
Check that your house electricity supply
installations are in order. Check that the plug is correctly inserted into the electricity supply
socket.
•
The noise has become louder. Check that the appliance is standing stable on a level place. To
make it level, regulate the front feet. Check if the appliance is not touching any furniture and that
no part of the refrigeration system at the back part of the appliance body is touching the wall.
Pull the appliance away from any furniture or walls. Check that the cause of increased noise isn’t
due to bottles, cans or dishes in the appliance that might be touching each other.
•
When the appliance door is opened, the rubber sealing gasket pulls out. The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it with
warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing
gasket back into the place.
•
The temperature rise indicator light is illuminated red. This means the appliance is being
connected to the electricity supply for the first time or it was disconnected for a significant period
(for thawing or during an interruption to the electricity supply), the freezer door is not closed or
is being frequently opened and closed, or a large amount of fresh food has been put in, and
therefore the temperature in the compartment has risen above -9 ºC. When the temperature in
the
compartment again falls below -9 ºC, the indicator light will go out.
ATTENTION! If the temperature indicator light does not go out (for reasons other
than those listed above) for longer than six hours, the compressor is either working
constantly or is not functioning. You need to consult service people.
•
High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance door are shutting tightly, whether the door wasn’t kept open longer than
necessary when taking out or putting in foodstuffs or whether a large amount of warm food was
placed in the appliance.
•
The top of the appliance has condensation on it. The ambient relative air humidity is
above 70 %. Ventilate the room where the appliance stands and if possible remove the cause
of the humidity.