10
R e m a r k s o n t h e a p p l i a n c e o p e r a t i n g n o i s e .
As the appliance operates and
goes through the freezing cycle, various noises will be emitted. This is normal and is not a
sign of any malfunction.
•
As the refrigerant circulates around the refrigeration system, it causes sounds like murmuring,
bubbling or rustling.
•
Louder sounds like popping or clicking may be heard for a short time as the freezer compressor
switches on.
C H A N G I N G T H E O P E N I N G D I R E C T I O N O F T H E D O O R S
It is recommended that changing the opening direction of the doors should be done with a helper.
You will need two spanners No. 8 and No. 10 and a Philips head screwdriver.
!
When changing the opening direction of the door YOU CAN NOT lay the freezer horizontally.
Do the actions below in the order they are listed:
W A R N I N G ! Turn off the appliance and pull the plug out of the electricity supply
socket.
1.
Remove the covers
c
from the body of the refrigerator and of the inner side of the door. Also
remove the upper bracket
6
together with the nut and washers and the spacer under the
bracket.
2.
Remove the door of the freezer compartment.
3.
Remove the bottom cover
1
.
4.
Remove the bottom bracket
2
together with washers on the axle and the plastic spacer.
Unscrew the axle together with washers from the bracket and screw them into the aperture on
the opposite side of the bracket symmetrically to former position.
Summary of Contents for TK 220 CHR
Page 3: ...1...
Page 37: ...35 N00F2200 2 2014 05 01...