manualshive.com logo in svg

KBR Multimess F96-***-5 Series, Quick Manual

Share
Download
KBR Multimess F96-***-5 Series Quick Manual Download Page 8

Rev. 5.00

23892_EDEK

ZA0030-4318-1_EN

8

KBR multimess F96-...-5

3 

Connecting the multimess F96-...-5

3.1 

Installation and assembly

  The applicable VDE regulations must be observed during installation!

  Before the device is connected to the power supply, check whether the local 

power supply conditions comply with the specifications on the nameplate. A 
faulty connection can destroy the device.  
A different power frequency can also affect the measurement.

  Connect the device in accordance with the connection diagram.

  The power supply input of systems that are at risk from lightning strikes must 

be equipped with suitable lightning protection.

3.2 Installation

Installation site: 

The device is designed to be installed in fixed and weather-

proof switchboards. Conductive switchboards must be grounded.

Installation position: 

vertical

Fixing:

 Using the clamps provided, the device is attached to the switchboard 

from behind.

Installation and electrical connection

Summary of Contents for Multimess F96-***-5 Series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands