manualshive.com logo in svg

KBR Multimess F96-***-5 Series, Quick Manual

Share
Download
KBR Multimess F96-***-5 Series Quick Manual Download Page 15

Rev. 5.00

23892_EDEK

ZA0030-4318-1_EN

15

KBR multimess F96-...-5

System operation

4.2  

Description of buttons and displays

1 Display navigation panel

The navigation panel shows the main menu selected, considerably simplifying 
operation of the device. The operator can immediately see what menu he is in.

2  Units display

The DOT matrix display is normally used to show measured values. Each phase 
has its own display. In some submenus, this display area is used to show addi-
tional information to assist operation.

3  Measured values area

These displays are used to represent measured, stored and programmed values. 
In some submenus, they are also used to simplify configuration with simple text 
output.

4  Additional information area

Additional information is conveyed with simple and self-explanatory icons. This 
additional information makes it easier for the operator to interpret the recorded 
values.

5  Hotkey area

The text line corresponds to the button keys lying below it and is used to issue 
messages and text. The interaction between key and corresponding display 
ensures user-friendly and self-explanatory operation.

Summary of Contents for Multimess F96-***-5 Series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands