KBR F144-3PH, User Manual

Page: 52 / 76

KBR multicomp F144-3PH
V2.00 52
19837_EDEBD
A0227-1816-1_EN
Setting ranges
7.10 setting ranges

Primary voltage 1 V to 999999 V Ph-Ph

Secondary voltage 1 V to 999999 V Ph-Ph

Zero-point creator On, Off
 Scanning frequency Auto, 50 Hz, 60 Hz

Primary current 1 A to 999999 A

Secondary current 1 A oder 5 A

Phase I 0°, 120°, 240°

Consumption target Cosφ 1.2 ind. 0.50 to cap. 0.50

Recovery target cosφ ind. 0.50 to cap. 0.50

FTS alarm cosφ ind. 0.50 to cap. 0.50

Stage power 0 to 9999.9 kvar inductive or capacitive

Type of connection 3-phase, phase-phase, single-phase

Discharge time 10 ms to 999.99 sec (thyro < 1 second)

Max. switching capacity per switching operation 0 to 999999 kVar

Contrast settings 00% to 99%

Brightness setting 00% to 99%

Dimming time 1 to 255 minutes

Dimming brightness 00% to 99%

Language selection text display German, English

Hysteresis connection 70 to 150 %
 Hysteresis disconnection 70 to 150 %

Idle time 0 to 999.99 sec.

Alarm delay FTS 1 to 9999 sec.

Switching interval 10 to 999.99 sec.

Attenuation coefficient current 0 to 9

Attenuation coefficient voltage 0 to 9

Attenuation coefficient Qmiss 0 to 9

Temperature measurement active, inactive

Switching threshold for switching on fan 0 to 70°C

Switching threshold for switching off fan 0 to 70°C

Switching threshold for switching on stages 0 to 70°C

Switching threshold for switching off stages 0 to 70°C

Overvoltage switch-off limit Up to 150%, dependent on primary voltage

Low load limit 0.01 to 9999.99 (in A)

Low load delay 1 to 60 Minutes

Average current limit 1 to 9999 (in A)
averaging time 8 minutes,
cannot be configured on the device

Operating cycle limit 0 to 999999

THD limit 0 to 100%, (0% = deactivated)

I d limit 0 to 100%, (0% = deactivated)

Reset parameters Reset to factory settings (default settings)

Password 4-digits, numerical (9999, meaning
all functions are accessible)