O p e r a t i n g I n s t r u c t i o n s
|
megaSun Tower Optima
8
Duties of the operator
The manufacturer cannot be held liable for dam-
ages or injuries resulting from improper use of the
equipment or non-observance of these operating
instructions.
Only use spare parts approved by KBL, otherwise
operating authorization and terms of guarantee will
become invalid. Only replace tubes and high pres-
sure lamps with those listed on the tanning device.
Otherwise, this voids the operating authorization and
warranty!
General safety advice
• Follow all instructions given in this manual. In addi-
tion, observe all relevant statutory provisions and
regulations, also those applicable in the country of
operation.
• The tanning device may only be installed and set
up by trained and authorised personnel having
received safety-related instruction.
• Arbitrary modifications or conversions of the equip-
ment are not permissible.
• Observe all danger signs and safety notices
attached to the equipment.
• Safety notices must not be removed, and safety
equipment must not be disabled or removed.
• The tanning device must only be operated when in
perfect working condition.
• Never operate the tanning device with the outer
covers or acrylic panes removed.
• Absolutely observe the maintenance frequencies
indicated in the maintenance plan.
Timer operation
The tanning device must be controlled via an external
timer that meets the requirements of EN 60335-2-27,
cl. 22.105. Should the external timer fail, an internal
timer will switch off the tanning device automatically
after 33 minutes.
Tanning times
Adhering to tanning times and schedules is essential.
Summary of Contents for megaSun Tower Optima
Page 1: ...OPERATING INSTRUCTIONS ...
Page 2: ......
Page 46: ...O p e r a t i n g I n s t r u c t i o n s megaSun Tower Optima 46 Remarks ...
Page 47: ......