background image

TRANSLATION OF THE ORIGINAL OPERATING INSTRUCTIONS
Version: BA_tower-optima_GB_B
Date: 03/2017
Control / Software version: KBL-7 / 01.48
Item no: 0100036382
Device name [tech.]: T3/52-180/36 uc

Copyright and Trademark

© Copyright 2017 KBL AG

This documentation only covers products manufactured by KBL AG. It must not be duplicated, photocopied, 
translated or stored without prior specific permission by KBL AG. Duplication on electronic media or in machine-
readable form, either in whole or in part, is also prohibited.

 is a registered trademark of KBL AG.

DISCLAIMER
All information given in this document correspond to the status quo at the date of publication but may be subject 
to changes. Therefore, we do not accept any liability for, nor do we guarantee the accuracy and/or completeness 
of the information.

EXPORT
Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective 
country of destination. Export to the USA and Canada of the KBL products, listed in this guide, or operation of 
the systems in these countries, are not permitted. KBL does not accept any manufacturers liability in case this 
direction is not adhered to. It is expressly pointed out that any violation of the export/operation prohibition will 
involve substantial risks of liability for the exporter and/or operator.

For instruction updates, please refer to http://www.kbl-support.de.

KBL AG
Ringstrasse 24-26 · 56307 Dernbach · Germany
Tel49(0)2689.9426-0 · Fax +49(0)2689.9426-66
Email: [email protected]

www.megaSun.de

Summary of Contents for megaSun Tower Optima

















































Reviews: