manualshive.com logo in svg

KBL megaSun Tower Optima, Operating Instructions Manual

The KBL megaSun Tower Optima is an exceptional tanning bed that offers a flawless tan experience. To ensure maximum usage, it comes with a detailed Operating Instructions Manual that can be easily downloaded for free from manualshive.com. Discover the ultimate tanning solution with this exceptional product.

Share
Download
background image

O p e r a t i n g   I n s t r u c t i o n s

 

|

 megaSun Tower Optima

38

Interior unit lighting

LED - UNIT LIGHTING

If the tanning device is lighted by means of high-per-
formance-LED‘s, these can only be replaced by a 
qualified specialist if they are defective. In this case, 
contact the service department!

CONVENTIONAL UNIT LIGHTING

4

If the tanning device is lighted by means of fluores-
cent lights, proceed as follows:

DOOR
• Place a suction cup in the centre of the respective 

pane and slowly pull the pane towards the front.

 

• Loosen the pane at one corner and go on down-

wards, then pull the pane off.

Caution!
Place the door panel carefully on a pad-
ded surface.

• There are three energy saving lamps behind the 

door panel.

• Replace energy saving lamps.
• Reattach the door panel. 

Summary of Contents for megaSun Tower Optima

















































Reviews:

No comments

Related manuals for megaSun Tower Optima

Brands by name

Popular brands

Load more brands