background image

O p e r a t i n g   I n s t r u c t i o n s

 

|

 megaSun 7000/7800 alpha

22

Starting the tanning session

The tanning session automatically starts after the 
external timer controlled delay time has expired. 
During the preset delay time the tanning session can 
be started anytime manually using the START button.

Operation during the tanning 
session

You can control the functions of the tanning device 
via the interior control panel during the tanning 
session. It is particularly easy for you to access the 
basic functions.
Additionally, you can also change the subordinate 
functions settings by using the interior control panel.

Buttons with recesses that can easily be sensed 
allow for easy operation of the system even with your 
eyes closed.

NOTES:
20 seconds after your last input, the interior control 
panel changes over to the indication of the tanning 
time. 

An information line at the bottom edge of the interior 
control panel shows the current music track.

START BUTTON
• Starts the tanning session during the 

timer controlled delay time

• as well as after an interruption caused 

by pressing the STOP button, provided 
that the booked tanning time has not 
elapsed yet.

STOP BUTTON
• Stops the tanning session 

if pressed for at least two 
seconds.

DISPLAY
• Shows the menu items 

and functions.

• Indicates the tanning time.
• Information line.

ARROW BUTTONS
• Select the subordinate 

function.

+

/

-

 BUTTONS

• Control the functions.

Position
Recessed button

Summary of Contents for MegaSun 7000a





















































Reviews:

Related manuals for MegaSun 7000a