O p e r a t i n g I n s t r u c t i o n s
|
megaSun 7000/7800 alpha
13
The tracks can only be selected via the user’s own
player. The volume can be controlled via the control
panel of the tanning device and also via the corre-
sponding operating elements provided by the user’s
player.
Either a headphone or an earphone with a 6.3 mm
jack plug can be used. The corresponding connec-
tor socket is located next to the line connector. The
audio signal is switched over automatically.
MP3
ATTENTION
• Danger of damage to the player due to
overheating.
• Do not place your player within areas that are
directly exposed to UV radiation.
Bluetooth connection
To connect an external player (smartphone etc.) wire-
lessly to the tanning device an optional Bluetooth
interface is available.
CONNECT EXTERNAL PLAYER
A Bluetooth connection can be established in
standby and during tanning mode.
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your player is configured
to search for other bluetooth devices.
Should this not be the case, enable blue-
tooth manually. To do so, please read the
instructions for your player.
• Depending on your settings the search will be
performed automatically or manually. All available
Bluetooth devices within reach will be listed after
a short time.
• Among the available tanning devices choose
“megaSun Sound”. In the service menu, a trailing
number (01, 02, 03, ...) can be added to tanning
device name.
• If necessary confirm the shown code and connect
again. Not every smart phone asks for a code.
megaSun 01
megaSun 01
Summary of Contents for MegaSun 7000a
