manualshive.com logo in svg

KBL megaSun 6900 a deluxe, Assembly Instructions Manual

The KBL megaSun 6900 a deluxe product comes with an exceptional assembly instructions manual that guarantees a hassle-free setup process. Our comprehensive manual, available for free download at manualshive.com, ensures you have all the necessary information to assemble and use this deluxe product effortlessly.

Share
Download
background image

A s s e m b l y   I n s t r u c t i o n s

 

|

 6808 /7908

25

• Have two people to lift the cladding out of the rear 

guide slot.

• Then  lift  it  off  the  two  bolts  of  the  knurled-head 

screws (

only 7908

).

• Lift  the  cladding  out  towards  the  front,  transport 

it to the installation site and set it down safely on 

protective padding. 

4.8.5 DISCONNECT CONNECTIONS

• Loosen both Airfl ex hoses on the canopy side.

7

• Loosen the four knurled-head screws and fold the 

sealing rubber onto the rear wall.

• Disconnect  plug  connectors  between  the  canopy 

and the rear wall:

 

- Plug  XD11–XD17  (allocation  is  model-depend-

ent).

 

- Patch cable to the control panel.

 

- USB cable.

 

- Hose, aquaCool air.

 

- Hose, aquaCool.

• Follow the connection diagram on the 

canopy during installation!

Summary of Contents for megaSun 6900 a deluxe













































Reviews:

No comments

Related manuals for megaSun 6900 a deluxe

JK-Products DAYON LightSpa Beauty Operating Instruction preview
DAYON LightSpa Beauty
Brand: JK-Products Pages: 70

Brands by name

Popular brands

Load more brands