6. Wait 90 to 180 seconds. After 90 to 180 seconds the jump starter should
be charged.
7. The digital voltage display will indicate charge level.
8. Turn the jump starter “OFF”.
9. After turning the jump starter “OFF” disconnect the jump starter clamps.
The BLACK NEGATIVE (-) first then the RED POSITIVE (+). Be sure
the jump starter is in the “OFF” position before disconnecting the clamps.
Failure to do so could cause damage.
10. The KrankingKART Mini HD is now ready for use.
Notes about charging.
1. If more than 5 minutes pass with the unit active, the unit will automatical-
ly shut off and enter sleep mode. If the unit is left in “ON” position longer
than 10 minutes, the device will enter sleep mode.
2. Different Vehicles may provide different levels of maximum charge. This
is because the unit can only charge up to the system voltage of the ve-
hicle used to recharge it.
3. The device may be charged to a maximum of 16V. Do NOT charge the
device to a voltage greater than 16V. Irreversible damage and safety
issues may occur.
4. Charging methods may vary. As a result, use common sense, use safety
measures, and adhere to warnings & cautions at all times.
ALWAYS WEAR EYE PROTECTION (WEAR SAFETY GLASSES)
WHEN USING AND WHEN WORKING AROUND BATTERIES.
USE COMMON SENSE, USE SAFETY MEASURES, AND ADHERE
TO WARINGS & CAUTIONS AT ALL TIMES.
To charge the KrankingKART Mini using a running
vehicle (continued):
