Kaysun COMPAK KHP-15/190 ACS2, Owners & Installation Manual, Page: 5 / 24

DISPOSAL: Do not dispose this
product as unsorted municipal
waste. Collection of such waste
separately for special treatment is
necessary.
Do not dispose of electrical
appliances as unsorted municipal waste, use
separate collection facilities.Contact your
local government for information
regarding the collection systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.
After a long term use, check the unit base
and fittings.
If damaged, the unit may sink and result in
injury.
Arrange the drain pipe to ensure smooth
draining.
Improper drainage work may cause wetting
of the building, furniture etc.
Do not touch the inner parts of the controller.
Do not remove the front panel. Some parts
inside are dangerous to touch, otherwise a
machine malfunction may be caused.
Do not turn off the power supply.
System will stop or restart heating automati-
cally. A continuous power supply for water
heating is necessary, except service and
maintenance.
If the unit has not been used for a long
period of time(2 weeks or more), hydrogen
gas will be produced in the water piping
system.
Hydrogen gas is extremely flammable. To
reduce the risk of injury under these
conditions, it is recommended that open the
hot water tap for several minutes at the
kitchen sink before using any electrical
appliance connected to the hot water system.
When hydrogen is present, there will probably
be an unusual sound such as air escaping
through the pipe as the water begins to flow.
There should be no smoking or open flame
near the tap at the time it is open.
Confirm the safety of the installation area
( walls, floors, etc. ) without hidden dangers
such as water, electricity, and gas. Before
wiring/pipes.
Before installation , check whether the
user's power supply meets the electrical
installation requirements of unit ( including
reliable grounding , leakage , and wire
diameter electrical load, etc.). If the electrical
installation requirements of the product are
not met, the installation of the product is
prohibited until the product is rectified.
When installing multiple air conditioners in a
centralized manner, please confirm the load
balance of the three-phase power supply,
and multiple units are prevented from being
assembled into the same phase of the
three-phase power supply.
Product installation should be fixed firmly,
Take reinforcement measures, when
necessary.
CAUTION
The earthing pole of socket must be
grounded well, make sure that power
supply socket and plug are dry enough
and connected tightly.
How to check the power supply socket
and plug are qualified?
Turn on power supply and keep the unit
running for a half hour, then turn off
power supply and plug out, check
whether the socket and plug is hot or not.
Before cleaning, be sure to stop the
operation and turn the breaker off or pull
out the power plug.
Otherwise, an electric shock and injury
may be caused.
Water temperature over 50
℃
can cause severe burns
instantly from scalds.
Children, disabled and elderly
are at highest risk of being
scalded. Feel water before
bathing or showering.
Water temperature limiting
valves are recommanded.
Do not operate the unit with a wet hand.
An electric shock may be caused.
The installation height of power supply
should be over 1.8m, if there is any water
spattered, separate the power supply
from water.
A one-way valve must be installed on the
water inlet side, which is available from
accessories, see manual "accessories"
part.
It’s normal if some water drops from the
hole of PT valve during operation. But, if
there is a great amount of water, call your
service agent for instructions.
2