Kaysun COMPAK KHP-15/190 ACS2 Owners & Installation Manual Download Page 2

Your safety is the most important thing we concerned!

WARNING

This unit is required reliable 

earthing before usage, otherwise 

might cause injury.

CAUTION

If you can't make sure that your house power supply is earthed well, please don't install the unit. 

Please have a qualified person perform the reliable earthing connection and the installation of the unit.

Examples of a qualified person include: licensed plumbers, authorized electric company personnel, 

and authorized service personnel.

Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a 

similarly qualified person.

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection 

of such waste separately for special treatment is necessary.

Do not dispose of electrical appliances as unsorted municipal waste, use separate 

collection facilities.

Contact your local government for information regarding the collection systems 

available.

If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into 

the groundwater and get into the food chain, damaging your health and well-being.

The wiring must be performed by professional technicians in accordance with national wiring 

regulations and this circuit diagram.

An all-pole disconnection device which has at least 3mm separation distance in all pole and a 

residual current device (RCD) with the rating not exceeding 30mA shall be incorporated in the 

fixed wiring according to the national rule.

The handle of PTR valve should be pulled out once per half a year to make sure that there is no

jam of the valve.

The drainage pipe should be well insulated in order to prevent water inside pipe from freezing

in cold weather.

This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand

the hazards involved. Cleaning and user maintenance shall not be made by children without

supervision.(FOR EN STANDARD)

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

The discharge pipe connected to PTR is to be installed in a continuously downward direction.

The water may drip from the discharge pipe of the pressure-relief device and that this pipe must

be left open to the atmosphere.

Regarding how the water heater can be drained, thanks to refer to the below paragraphs of the

manual.

Summary of Contents for COMPAK KHP-15/190 ACS2

























Reviews: