EN
34
TROUBLESHOOTING
Problem
Cause
Action
The product indicates or emits
audio signal without detection
of an object.
Electromagnetic interference
from the surroundings.
Move the search area.
Extremely high relative
humidity.
Wait for a moment and try
again.
The product emits false signals. Sensitivity set too high, or
electromagnetic interference
from the surroundings.
Set a lower sensitivity.
The search coil is moved too
quickly or at an unsuitable
angle over the ground.
Move the search coil more
slowly and at the right angle.
2 metal detectors are used
near each other.
Make sure that there is at least
6 metres between the metal
detectors.
The object is oxidised.
The product does not detect
anything.
Sensitivity set too low.
Set a higher sensitivity.
No objects within range.
Set a wider range.
The search coil is not parallel
with the ground.
Hold the search coil parallel
with the ground.
The product does not work.
The 5-pin plug is not correctly
inserted.
Plug in the plug correctly.
The batteries are discharged.
Replace the batteries.
Summary of Contents for 017719
Page 4: ...1 2 1 2 3 10 11 6 8 14 12 13 9 7 5 4 ...
Page 5: ...4 3 1 2 3 6 7 5 4 ...
