EN
31
3. SENS (sensitivity)
Adjusting the sensitivity Turn the SENS control
clockwise to increase sensitivity. A high
sensitivity should normally be selected.
In mineral rich areas, or areas with electrical
interference, a lower level can be more
effective.
4. Earphone jack
Connect stereo earphones with 3.5 mm plug
to the earphone jack. The internal speaker is
deactivated.
5. Mode selector
• DISC (discrimination)
. This mode is used
to search for and differentiate between
different metals.
• ALL METAL (metal indication)
. Used for
searching for all metals. In this mode the
product has automatic ground balancing,
but no discrimination.
• TONE (sound setting)
. Set with the DISC/
TONE control. The product emits signals
with different pitches, depending of the
type of metal.
6. DISC/TONE control
Adjusting the discrimination. Turn clockwise
from low to high mode for more discrimination
or elimination of unwanted metals. In TONE
mode the type of metal is indicated with
different pitches, depending on the setting.
7. Battery indicator
Replace the battery when the battery indicator
goes on.
HOW TO USE
The product has four operating modes: DISC,
TONE, ALL METAL and PINPOINT. DISC, TONE
the plug in the connector, this can
damage the product.
• Do not overtighten. Do not use a tool to
tighten.
BATTERY
Insertion
FIG. 2
1. Check that the power switch on the
control panel is switched off.
2. Open the battery cover in the direction of
the arrow.
3. Insert 6 AA batteries in the battery
compartment with the correct polarity as
shown by the markings.
NOTE:
• Remove the batteries if the product is
not going to be used for a week or
longer. They can leak chemicals that
damage the electronic parts.
WARNING!
Do not burn batteries – risk of explosion.
Recycle used batteries in accordance with
local regulations.
USE
DESCRIPTION OF CONTROL UNIT
FIG. 3
1. Signal indicator
The pointer moves to the right when metal is
detected.
2. Power switch/volume control
Used to switch on/switch off the product and to
set the volume. Turn clockwise (away from OFF)
to start the product. Continue turning clockwise
to increase the volume. Turn anticlockwise all
the way to switch off the product.
Summary of Contents for 017719
Page 4: ...1 2 1 2 3 10 11 6 8 14 12 13 9 7 5 4 ...
Page 5: ...4 3 1 2 3 6 7 5 4 ...
