EN
30
5. Bottom handle
6. Lock nut
7. Plug 5-pin
8. Spring lock
9. Middle handle
10. Top handle
11. Button for PINPOINT
12. Control panel
13. Handle
14. Armrest
1. Undo the lock nut on the bottom handle
and remove the lock nut and cotter.
Put in the bottom handle and align the
holes in the attachment on the search
coil with the holes in the handle. Put the
cotter through the holes and replace and
tighten the lock nut.
2. Press the spring lock in the middle handle
and put the middle handle in the top
handle.
3. Undo the lock nut on the middle handle
and put the bottom handle in the middle
handle.
4. Tighten the lock nut.
5. Wind the cable to the search coil round
the handle. Do not over-stretch the cable.
Put the plug on the search coil cable in
the 5-pin connector on the front of the
control panel.
6. Turn the lock nut on the handle clockwise
to release. Stand upright with the detector
in your hand and the search coil 2 to 5 cm
over the ground with your arm relaxed
at your side, and adjust the handle to
the right length. Turn the lock nut on the
handle anticlockwise to tighten.
NOTE:
• The plug on the search coil cable can
only be inserted in one way. Do not force
TECHNICAL DATA
Battery
6 AA
Scan depth for coins
18 cm
Waterproof*
Yes
Earphone jack
3.5 mm
Weight
1.2 kg
*Search coil only
DESCRIPTION
This versatile and user-friendly product is
intended for searching for coins, prehistoric
finds, jewellery, gold and silver in most types of
soil, in snow, lawns and rock terrain, etc.
The product has four operating modes:
DISCRIMINATION (DISC) This mode is used to
search for and differentiate between different
metals.
TONE (sound setting). Set with the DISC/
TONE control. The product emits signals with
different pitches, depending of the type of
metal.
PINPOINT (target localisation). Used for precise
localisation of object.
ALL METAL (metal indication). Used for
searching for all metals. In this mode the
product has automatic ground balancing.
ASSEMBLY
No tools are needed for assembly.
FIG. 1
1. Search coil
2. Cotter
3. Lock nut
4. Cable
Summary of Contents for 017719
Page 4: ...1 2 1 2 3 10 11 6 8 14 12 13 9 7 5 4 ...
Page 5: ...4 3 1 2 3 6 7 5 4 ...
