EN
45
A. Front
B. Back
FIG. 13
REMOTE CONTROL AND BATTERIES
NOTE:
Read the safety instructions for the remote
control and batteries.
Remote control
3. On/Off
4. Function mode/End call
5. Frequency setting and track selection
6. Menu button
7. Playback/pause
8. Random playback
9. Frequency mode (equalizer, EQ)
10. Answer/forward call
11. Sound off
12. Frequency band button
13. Volume setting
14. Automatic station search and saving
15. Repetition
16. Searching on intro
17. Changing files up/down
18. Display button
19. Loudness (LOU)
FIG. 14
Batteries
Replace all the batteries in the remote control
if the range of the remote control diminishes,
or the product does not respond to the remote
control. Insert the new batteries with the
correct polarity.
devices that require drive routines or consume
more than 500 mA.
Technical data for USB function
• Supports up to 32 GB USB flash memory
• Supports up to 9999 tracks/titles
• Supports USB 1.1
• Supports USB 2.0 (with same transfer
speed as version 1.1)
• File manager: FAT12/FAT16/FAT32
NOTE:
The main unit is not compatible with external
hard disks.
Starting SD mode
1. The SD card slot is behind the front panel.
2. Insert the micro SD card in the slot, the
right way round, until it clicks in place.
3. Browse through the programme sources
with the SRC button until SD PLAY is shown.
Stopping SD playback
1. Playback is stopped either by disconnecting
the SD device or switching to another
programme source with SRC button.
2. The button can be used to switch to SD
mode when the SD device is connected,
or to switch between other available
programme sources.
Technical data for SD/MMC
function
• Supports up to 32 GB SD/MMC card
• Supports up to 9999 tracks/titles
• Support for file manager FAT12, FAT16, FAT32
IMPORTANT:
Check that the micro SD card is the right way
round before inserting it in the slot (see fig.).
Never put a micro SD card in the wrong way
round, this will damage the slot and the card.
