EN
44
Changing files up/down
Tap the button M5 or M6 to change file up or
down to jump one file level up or down.
USING WITH SD/MMC CARD AND
USB MEMORY
Starting USB mode.
Connect the USB device and switch to USB PLAY
by pressing the button SRC. The text READING
is shown in the display to indicate that the USB
device is connected and that the playback has
started.
FIG. 12
WARNING!
If the USB device is large and/or heavy this
can cause permanent and serious damage
to the main unit and obstruct access to the
buttons on the front panel. USB units should
therefore be connected via an extension cord
(sold separately).
Stopping USB playback
1. Playback is stopped either by
disconnecting the USB device or switching
to another programme source with the
SRC button.
2. The button can be used to switch to USB
mode when the USB device is connected,
or to switch between other available
programme sources.
IMPORTANT:
Be careful when connecting and
disconnecting USB devices – risk of damaging
USB port and device.
Compatibility
The main unit may be incompatible with some
USB devices. This particularly applies to USB
2. Set the required station with the stepping
button for frequency setting and track
selection.
3. Press the shortcut button under which
the set station is to be saved for at least
2 seconds. The shortcut number of
the set station is shown on the display
and a short audio prompt is given to
acknowledge.
Shortcut to saved radio station
1. Select frequency band (if the right band
has not already been selected).
2. Tap the required shortcut button to set the
station.
USING MP3/SD/USB
Play/pause and first track
Tap the M1 button to pause playback of MP3 file.
To resume playback, press the button again.
Searching on intro
Press the button (P2) to automatically play
the first 10 seconds of each track in the
programme source. To return to normal
playback of the required track, press the button
again.
Repetition
Press the button P3 to activate the repetition
function. To stop repetition, press the button
again.
Random playback
Press the button (M4) to activate playback of
the tracks in random order. To stop random
playback, press the button again.
