The 21 TT125 uses a single stand for parking. The single stand
is on the left side of the motorcycle. When in use, straighten the
motorcycle, kick the single stand to expand it, and tilt the
motorcycle to the left so that the single stand touches the
ground and supports the motorcycle.
Notes before use
Suggestions for first-time users
1.Please read this manual before driving, especially sections "complete vehicle handling" and "riding
instructions".
2.Please perform Normative running-in before riding.
3.If any parts problems are found in use, please refer to this manual for repair or contact the dealer.
4.After each use, the motorcycle needs to be cleaned with water.
5.Do not drive in inclement weather (e.g. rainstorm, blizzard, etc.) unless necessary.
6.The company is not responsible for any vehicle problems caused by malicious acts.
Running-in process
Motorcycle engines have many parts that make relative movements, such as pistons, piston rings, cylinder blocks,
and meshing transmission gears. Therefore, in the initial stage of use, the engine must be regularly run-in. The
running-in can adapt the moving parts to each other, correct the working gap, and form a good smooth friction
surface that can withstand large loads. Only after the running-in engine is standardized can it have excellent
performance and reliability.
The recommended running-in steps are as follows:
1. 0 ~ 2.5h stage: when using a motorcycle at 50% ~ 75% throttle, the speed should be changed frequently to
