ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 52 -
You should change the coolant regularly to increase
service lift.
Main work:
Drain out the coolant. → p.50
Mount the screw after draining the coolant
completely.
Fill in a little of coolant through water tank.
Always check if there is leakage or not.
Fill in the coolant to specific value.
Start the engine for 5 minutes to heat that, then
stop.
Check the coolant level again after the engine
cooled down. And correct the coolant level if
necessary.
Tighten the tank cap.
WARNING
DANGER OF SCALDING
Do not remove the
radiator cap, screw or other cooling system components
when the engine is hot. Wait for the engine and cooling
system to cool down.
If the coolant drops on the tire, it will cause the tire
easy to slip and thereby cause the accident.
So, you should rinse the coolant which dropped onto
the frame and tire.
You should check the drained-out coolant, if the liquid
is white, it means the aluminum parts was corroded; if
the liquid is brown, it means the steel or iron parts was
corroded. Otherwise, it means the cooling system
works well.
Check the seal ring, if there is any damage, change a
new one.
INTRODUCING ABOUT THE ENGINE STRUCTURE
