ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 29 -
cannot be removed.
REMOVING OR INSTALLING THE FRONT DISC BRAKE
Removing Steps are as follow:
1.
Remove the mounting bolt of disc brake clamp.
2.
Remove the front brake oil pipe clamp.
3.
Remove the front brake handle.
4.
Remove the front cable panel.
5.
Remove the front disc brake.
Installing Steps:
The installment should be carried out in the reverse
order of removal.
NOTE
: For KT250 model, remove the disc brake cover
first.
REMOVING OR INSTALLING THE FRONT SHOCK ABSORBER
Removing Steps as follows:
1.
remove the front disc brake.
2.
Remove the front wheel.
3.
Loosen the mounting bolt on the linkage.
4.
Remove the front shock absorber.
Installing Steps:
The installment should be carried out in the reverse
order of removal.
REMOVING OR INSTALLING THE LINKAGE
Removing Steps are as follows:
1.
Remove the front shock absorber
2.
Remove the lock nut of the steering column
3.
Remove the upper link board
4.
Remove the adjusting nut of the steering column
5.
Take out the lower link board
6.
Remove the steering column
7.
The installation is carried out in the reverse order of
removal
Installing Steps:
