29
M5101-EN Rev. B |
Chapter 7. Standalone Manual Mode
While the Kaye LTR-150 was primarily intended for automatic calibration with the Kaye Validation products it
can also be utilized as a Standalone multi-calibrator for a wide range of sensors and applications. This makes
it ideal for general use in the metrology lab.
In Remote mode, the LTR-150 relies solely on the associated Kaye software to define and control the set
points, dwell times, ramp and soak profiles, perform datalogging, and report generation.
In Standalone mode, utilizing the easy to use touchscreen, the user has the flexibility of configuring these
parameters under Test Tasks. Test tasks are containers for defined test conditions. They are helpful for
recurring testing processes and standardising test sequences.
All the required settings and configurations for the calibration of test sensors are compiled in a test task. The
parameters of the testing task can be saved, and easily selected later for specific testing.
The operational concept of the LTR-150 in Standalone mode is based on self-defined test tasks, which are
described below.
7.1 Standalone Main Screen
The individual icons and key features of the main screen are presented in brief in the following:
Chapter 7. Standalone Manual Mode
Summary of Contents for LTR-150
Page 43: ...43 M5101 EN Rev B Notes...