22
2) PIANO PANORAMA
Panorama sets the width of the stereo image for the piano microphones. With the PR-1, you can record a piano with two
piano microphones (left and right). Piano Panorama allows you to adjust where the signal from each microphone will
placed in the stereo field. You can adjust the settings to provide an extreme left and right stereo image or you can adjust the
Panorama so the stereo image is more centered.
Press the EQ button two times. (If you selected USER EQ, press the EQ button five times). The button will light and the
display will show the following information.
Set the value with the “+ YES”, “– NO” buttons.
The value changes from (L10 – R10), (L9 – R9), (L2 – R2), (L1 – R1), CENTER. If you select L10 – R10, the stereo image
will be at its widest point and the left and right microphone signals will be completely separated, left and right. As you
select smaller values the stereo image will become more centered. When Piano Panorama is set to CENTER, the stereo
image will be completely centered and the same sound will come from both speakers or both sides of the headphones.
If you want to create your own EQ setting, select “USER”. You can adjust the BASS/MIDDLE/TREBLE frequency bands
individually to your taste. After you select USER, press the EQ button again to select the BASS/MIDDLE/TREBLE
bands.
These settings will be memorized even when you turn the power off.
1-1)
PIANO TREBLE/MIDDLE/BASS (These parameters only appear when you select USER)
Select USER and press the EQ button. You can adjust the BASS/MID/TREBLE frequency bands individually by using the
“+ YES”, “– NO” buttons within a range of –12 to +12. Negative values reduce the volume of the selected band and
positive values increase the volume of the selected band. Keep on pressing the EQ button to select the different bands.
You can adjust the higher frequencies for the piano mics by using the “+ YES”, “– NO” buttons within a range of –12 to
+12. Negative values reduce the volume and positive values increase the volume of selected band.
You can adjust the middle frequencies for the piano mics by using the “+ YES”, “– NO” buttons within a range of –12 to
+12. Negative values reduce the volume and positive values increase the volume of the selected band.
You can adjust the lower frequencies for the piano mics by using the “+ YES”, “– NO” buttons within a range of –12 to
+12. Negative values reduce the volume and positive values increase the volume of the selected band.
PIANO
MIC
TONE
USER
PIANO
MIC
MIDDLE
+2
PIANO
MIC
TREBLE
0
PIANO
MIC
BASS
+2
PIANO
PANORAMA
L8-R8
Note) After adjusting treble, middle, and bass, please check the recording level. When you set the EQ bands to
positive settings it may cause the signal level to be too high and cause distortion.
