17
1) FINALIZE THE CD
Before you can play a CD-R or CD-RW disc on a conventional CD player you must first finalize the disc. Once you finalize
a CD-R you cannot record any more music on the disc regardless of how much time may remain available on the disc.
Press the CD button. The button will light and the display will show the
following information.
If you want to finalize the disc, press the “+ YES” button.
The display will show the remaining time (in minute) that is recordable in the CD-RW and the PR-1 will ask if you really
want to finalize.
If you are sure you want to finalize the disc, press the “+ YES” button again.
Display while finalizing
Display once finalizing is completed
Note 1) CD’s recorded on the PR-1 may not playback on all CD players even after they have been finalized. This
is because certain types of older CD players or CD radio cassette tape recorders cannot play back CD-
R or CD-RW discs.
Note 2) Finalizing a disc can take up to several minutes. This is normal.
BUTTON FUNCTIONS
All of the parameters and functions used for editing and adjusting the various PR-1 settings have been organized into three
main menus assigned to the CD, EQ, and REVERB buttons. This section of the manual will explain these parameters and
functions in detail.
1
. CD Button Menu
* Press CD button. The button will light and the various parameters in the CD menu will be displayed.
* Press the CD button repeatedly to advance through the menu.
* To change the value for the selected parameter, press “+ YES”, “– NO” button.
* When you are finished making your settings, press the BACK button to go back to main screen. The CD button light will
turn off.
The following parameters are assigned to the CD button.
1)
FINALIZE THE CD
2)
ERASE THE LAST SONG RECORDED (CD-RW)
3)
ERASE ALL SONGS (CD-RW)
4)
UNFINALIZE THE CD-RW
5)
START TIMER
6)
PITCH OF CD (fine tuning of pitch)
7)
REPEAT
8)
LANGUAGE SETTING
9)
FACTORY RESET
CD-R
Finalize
CD-RW
Sealed
CD
FINALIZE
YES/NO
67minutes
REST
YES/NO
CD
FINALIZE
EXECUTING
CD
FINALIZE
COMPLETED