![background image](http://html1.mh-extra.com/html/kawai/cp-2/cp-2_owners-manual_3817198030.webp)
Page
30
3
Pla
ying the Piano
(Basic Controls)
This “
Priority Part
” depends on the current situation. If you only have one Part active, regardless of which Part it
is, the preset effect settings for that sound will be used. If you have two or more Parts active, then the CP will treat
one of them as the Priority Part, and ignore the settings of the other(s).
If the the Effect For Sound is set to “Panel” in the System then the Preset effect settings for each Sound will be
ignored and the Part Priority will be ignored. (See Effect For Sound on page 109).
Here are some guidelines for Effect Priority:
When the RIGHT3 part is set to SOLO type, priority is given to the Parts in the following order: RIGHT3 > RIGHT1 >
RIGHT2 > LEFT. This means that anytime the RIGHT3 Part is active, its Effect settings will be used, not only for its
sound but for any sound in any other Part, that you want to add effects to. Likewise, the only time an active LEFT Part’s
settings will be applied is if the other 3 Parts are inactive.
When the RIGHT3 part is set to NORMAL type, priority is given to the Parts in the following order: RIGHT1 > RIGHT2
> RIGHT3 > LEFT. This means that anytime the RIGHT1 Part is active, its Effect settings will be used, not only for its
sound but for any sound in any other Part, that you want to add effects to. Likewise, the only time an active LEFT Part’s
settings will be applied is if the other 3 Parts are inactive.
Unless you change them, the Effect settings will only change in response to a change in the Priority Part being activated/
deactivated, or a new sound is assigned to an active Priority Part. In the latter case, the new Effect settings will reflect
the Preset effect settings for the new sound.
When the Effect settings change for the Piority Part, the Effects will be automatically turned off for the other Parts. (This
is so that your Flute sound on RIGHT2 doesn’t suddenly get effected by the Distortion settings of the Electric Guitar that
you’ve just assigned to the RIGHT3 Part!)
You can, however, turn the effect on for any Part by adjusting the Effect On/Off option in the display for that Part.
Example
Assume that your CP is set up according to the following chart, and the RIGHT3 part is set to SOLO type.
RIGHT3
RIGHT1
RIGHT2
LEFT
Part
Inactive
Active
Inactive
Active
Effect
On
On
Off
On
If you then select a different sound for RIGHT1, the Effect setting for the RIGHT3, RIGHT2, LEFT will be turned
off automatically. This is because RIGHT1 is the Priority Part (note that the SOLO Part is NOT the Priority Part
because it was inactive).
The chart would now look like this:
RIGHT3
RIGHT1
RIGHT2
LEFT
Part
Inactive
Active
Inactive
Active
Effect
Off
On
Off
Off
Even if you now assign a new sound to the RIGHT3 Part, the Effect settings for the other Parts won’t change,
because RIGHT3 is still inactive, so therefore would not have priority.
Once you make the RIGHT3 Part active, however, it would now be considered the Priority Part. The Effect settings
for the other Parts will again be turned off.
RIGHT3
RIGHT1
RIGHT2
LEFT
Part
Active
Active
Inactive
Active
Effect
Off
Off
Off
Off
At this point, if the Effect that has been called up along with the RIGHT3 sound is one that you’d like to use for the
other Parts, simply select Effect On in the LCD display for those Parts.
Summary of Contents for CP 2
