![background image](http://html1.mh-extra.com/html/kawai/cp-2/cp-2_owners-manual_3817198040.webp)
Page
40
4
Recording a Song
¡
Part Status
The playback and record status for the RIGHT/LEFT Parts and the Style are displayed at the bottom of the LCD
screen. Whether you are in the process of recording or playing back your song it is helpful to know the status for
each of these Parts.
The LCD screen will show the following Part status messages at the bottom of the screen:
REC
This Part is ready to be recorded. This message is only displayed after the REC button has been pressed.
PLAY
This Part has been recorded and will be heard both on playback and while recording.
MUTE
This Part has been recorded but will be silent both on playback and while recording.
– – –
This part has not been recorded.
After you have recorded a song you can change the status for a Part by touching the appropriate Part button, at
the bottom of the LCD screen. Touching these Part buttons during playback will select PLAY or MUTE. REC can
only be selected after you press the REC button but before you begin recording.
During recording you can however set any Part to PLAY or MUTE by touching the appropriate Part button.
You can record all RIGHT/LEFT Parts as well as the Style simultaneously or only certain Parts as you choose.
When you first record a song all Parts and the Style will be automatically set to REC but only the active Parts
and the Style will be recorded. When you are finished recording the status for any active Parts and the Style will
automatically change from REC to PLAY. After recording, the status for any RIGHT/LEFT Parts that were not active
during recording will be automatically changed to - - - to show they have not been recorded yet.
When you press the PLAY/STOP button to listen to your song any Parts set to PLAY status will be heard.
Re-recording or adding another Part
After you have recorded a song you can Re-record a Part or add (overdub) other Parts if you like with the following
procedure. Re-recording a Part completely erases the previous performance for that Part automatically.
¡
To Re-record or add a Part:
Step 1
Make sure the Part(s) you wish to Re-record are active, then select any sounds or change panel settings
as desired.
Step 2
Press the REC button.
Step 3
Touch the appropriate Part button(s) at the bottom of the LCD screen to set the desired Part(s) to REC.
Step 4
Begin recording by following step 2 in the “To Record” section on page 40.
Remember Re-Recording a Part completely erases the previously recorded performance for that Part. You can
Re-record or add any of the RIGHT/LEFT Parts as many times as you like but you can only have one performance/
sound for each RIGHT/LEFT Part.
Summary of Contents for CP 2
