Instructions for use SMARTmatic S20 - 1.011.6750 SMARTmatic S20 K - 1.011.6751 SMARTmatic S20 S - 1.011.6752
3 Description of the product | 3.1 Purpose - Intended use
10 / 28
3.1 Purpose - Intended use
Indications for Use
The SMARTmatic handpieces are intended for the removal of carious material, reduc-
ing of hard tooth structure, cavity and crown preparations, root canal preparations, re-
moval of fillings, processing and finishing tooth preparations, restorations, and for pol-
ishing teeth. They are designed for use by a trained professional in the field of general
dentistry.
CAUTION
US Federal law restricts this device to sale by or on the order of a healthcare profes-
sional / dentist.
For dental use only.
Proper Use:
In accordance with these regulations, this medical device may only be used by a prop-
erly trained user and for the application described herein. You need to comply with the
following:
▪ the applicable health and safety regulations
▪ the applicable accident prevention regulations
▪ these Instructions for use
In accordance with these regulations, the user is required to:
▪ only use equipment that is operating properly
▪ adhere to the specified intended use
▪ protect himself or herself, the patient and third parties from danger, and
▪ avoid contamination from the product
3.2 Technical Specifications
Drive speed
max. 40,000 rpm
Speed transmission
1:1
Cooling air flow
5.5 to 9.5 Nl/min
Contra-angle handpieces S20 and S20 S can be attached to all INTRAmatic (LUX)
motors and motors with a connector in accordance with ISO 3964.
The contra-angle handpiece S20 K can be mounted on INTRA Motor 181K.
With press-button chuck.
Usable with contra-angle cutters or grinders.
Applies to S20 S only (using the spray clip and the hose):
Spray water pressure 0.8 to 2.0 bar (12 to 29 psi)
Spray air pressure 1.0 to 2.0 bar (15 to 29 psi)
Amount of air spray min. 1.5 Nl/min (at 2 bar)