Operating Manual
Original Operating Manual
15
Make the settings in the numerical sequence and in the direction of the arrows
5.
Operation
5.1
General
At least once per working shift, the machine and equipment must be inspected for
visible damage and defects.
Repeat faults to your superior and have them rectified without delay.
Be aware of persons present in the area where you are working or driving and ensure
that they are not endangered.
Do not transport any load exceeding that specified on the residual load plate for the
particular combination of lift truck and attachment.
Note the load-bearing capacity of the attachment as stated on the rating plate. This
figure always represents the load carried by two or more fork arms.
The nominal capacity of the forks must exceed the load.
5.2
Load handling
Position the mast vertically and take up the load parallel to the floor.
Only transport stable drums, i.e. steel drums with lids.
Never pick up drums stacked on top of each other.
Raise the load about 300 mm and tilt the mast backwards.
Centre the load to the middle of the lift truck during take-up and transport.
