Operating Manual
22
Original Operating Manual
Replace defective supporting rollers (15) in the hooks (14) by removing the screws
(13). Using suitable hoisting gear tilt the clamp body (7) forwards away from the fork
carriage on the lift truck. Remove the bolts in the hooks, remove the defective
supporting rollers (15) and replace them with new ones. Remount the clamp body (7)
in the reverse order.
After installing or removing a cylinder (6), always check the clearance between the
cylinder mount and nut of the cylinder (8). Cylinders are installed with axial clearance
of 1.5 to 2 mm.
