background image

 

Operating Manual 

 

Original Operating Manual

 

 

2. 

Safety aspects 

 

 

As the user, extend the safety instructions with generally applicable, legal and other 
measures that ensure a safe and environmentally friendly operation of the 
attachment.

 

 

Pay close attention to all safety- and danger-related signs on the attachment and in 
this operating manual. Failure to observe these can result in severe injury or even 
death. 

 

 

Pay close attention to the operating manual provided by the manufacturer of the fork 
lift truck.

 

 

Keep a safe distance away from moving, reciprocating or rotating parts of the 
attachment to avoid danger of crushing, pinching or entanglement.

 

 

Notify the responsible department/person immediately of changes and faults in 
operation of the attachment that affect safety. 
The attachment shall be shut down.

 

 

Use aids to vision (e.g. mirrors, camera, etc.) where goods being transported obstruct 
vision.

 

 

Only allow work on the attachment to be carried out by qualified and authorised 
persons. Adhere to the legal minimum age in the country of operation!

 

 

The attachment should only be used for the purpose intended.

 

 

Never work on or with attachments while under the influence of drugs, alcohol or 
medicines which affect reaction time.

 

 
 

Summary of Contents for 3T458P



























Reviews: